Microcut LD Serisi Torna Tezgahı

LD serisi torna tezgahı, tek taret çift spindel  ile çalışmaktadır. Bir prosesde , çok işlevli işleme teknolisine sahiptir. Çok işlevli işleme yeteneği ile verimlilik en üst düzeydedir.

.

Makine Özellikleri

Özellik Birim LD-52 LD-65
 Swing over bed mm Ø650 Ø650
 Swing over cross slide mm Ø380 Ø380
 Max. cutting diameter mm Ø380 Ø380
 Max. cutting length mm 520 520
 Axes travel (X/Y/Z/Z2) mm X: 215(200+15)

Y: 100(±50)

Z: 520/1020

Z2: 520/1020

 Rapid feed rate (X/Y/Z/Z2) m/min 24/6 /24/24 24/6 /24/24
  Bar capacity mm Ø52 Ø65
 Spindle speed rpm Primary: 5000
Second: 5000
Primary: 4000
Second: 5000
 Spindle motor kW Primary spindle:11/15 (Fanuc);
Auxiliary spindle: 7.5/11 (Fanuc)
Primary spindle:11/15 (Fanuc);
Auxiliary spindle: 7.5/11 (Fanuc)

Standart Donanımlar

  • Fanuc 0iTF with 8.4” LCD Manual Guide 0i
  • Main spindle motor 11/15kW
  • Auxiliary spindle motor 7.5/11kW
  • C axis with braking system
  • Power turret
  • Cooling system
  • Hydraulic 3-jaw chuck with hard jaw & soft jaw
  • Foot switch for chuck operation
  • Auto lubrication system
  • Work lamp
  • Hydraulic unit
  • Fully enclosed splash guard with interlock safety device
  • Tool set & box, level pads, operation manual & parts list
  • Heat exchanger for electric cabinet

İsteğe Bağlı Donanımlar

  • C axis
  • A axis
  • Y axis
  • Oil skimmer
  • Chip conveyor
  • Air conditioner
  • 12-station hydraulic turret, regular type
  • 12-station VDI30/VDI40 turret
  • 12-station VDI30 power turret
  • 12-station VDI30 power servo turret
  • 10”Hydraulic 3-jaw chuck for LD-65 primary spindle
  • Hydraulic collet chuck
  • Tool probe (Automatic / Manual)
  • Coolant through tool system (20bar)
  • Bar feeder
  • Fanuc 0iTF controller with 10.4″ LCD display and Manual Guide
  • FANUC α15/7000i 15/18.5 kW for auxiliary spindle